РУССКИЙ
ENGLISH
EESTI
- -10%
Technical data
s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm
This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.
s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm
This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.
Festool Drilling cutter HW S8 D8/19
32.45
29.21
Save 10%
Tax excluded
Technical data
s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm
This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.
s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm
This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.
Strenght and benefits
For cutouts of any kind – without pre-drilling, the drilling cutter goes right through the coating material|Through the subsequent routing of contours, splinters on the edges of the coatings are effectively avoided
For cutouts of any kind – without pre-drilling, the drilling cutter goes right through the coating material|Through the subsequent routing of contours, splinters on the edges of the coatings are effectively avoided
Strengths and benefits
- For cutouts of any kind – without pre-drilling, the drilling cutter goes right through the coating material
- Through the subsequent routing of contours, splinters on the edges of the coatings are effectively avoided
Main areas of use
- Processing HPL laminate
- Flush trimming of veneered surfaces
- for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200
- with start-up level
- with drill point for plunge-cutting
- carbide blades
in self-service display pack
Warranty all-inclusive--> Find out more
491037
2 Items