ROUTING

ROUTING

There are 262 products.

Sort by:

Showing 1-30 of 262 item(s)

FESTOOL ФРЕЗА ДЛЯ ВЫБОРКИ V- ОБРАЗНОГО ПАЗА

-10%

Festool Plasterboard V-groove cutter HW S8 D12,5/45°

53.81 -10% 48.43

Technical data s 8 mm; D 12.50 mm; NL 14.00 mm; GL 55.00 mm; Alpha 45.00 ° Festool cutters are produced from first-class steel and wear-resistant carbide. This allows high stability and run-out accuracy, precise contours and a long service life. The high-strength hard solderings of the carbide blades ensure risk-free and impeccable working.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW СО СМЕННЫМИ НОЖАМИ S8 HW R2 D28 KL12,7OFK

-10%

Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK

149.09 -10% 134.18

Technical data s 8 mm; D 28.00 mm; NL 3.00 mm; GL 55.00 mm; R 2.00 mm Flush trimming and rounding off in a single step is possible with this cutter. Should the blades get blunt at some point, the reversible blades are turned easily – and a sharp tool is available again immediately.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW СО СМЕННЫМИ НОЖАМИ S8 HW R1 D28 KL12,7OFK

-10%

Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK

149.09 -10% 134.18

Technical data s 8 mm; D 28.00 mm; NL 3.00 mm; GL 55.00 mm; R 1.00 mm Flush trimming and rounding off in a single step is possible with this cutter. Should the blades get blunt at some point, the reversible blades are turned easily – and a sharp tool is available again immediately.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW С ХВОСТОВИКОМ 8 ММ HW S8 D31,7/R9,5 KL

-10%

Festool Roundover cutter HW S8 D31,7/R9,5 KL

70.95 -10% 63.86

Technical data s 8 mm; R 9.50 mm; D 31.70 mm; NL 16.50 mm; GL 56.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW С ХВОСТОВИКОМ 8 ММ HW S8 D16,7/R2 KL

-10%

Festool Roundover cutter HW S8 D16,7/R2 KL

62.03 -10% 55.83

Technical data s 8 mm; R 2.00 mm; D 16.70 mm; NL 9.00 mm; GL 49.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW HW R4-OFK 500

-10%

Festool Roundover cutter HW R4-OFK 500

77.92 -10% 70.13

Technical data D 27.00 mm; R 4.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW HW R3-OFK 500

-10%

Festool Roundover cutter HW R3-OFK 500

71.86 -10% 64.67

Technical data D 27.00 mm; R 3.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW HW R2-OFK 500

-10%

Festool Roundover cutter HW R2-OFK 500

71.86 -10% 64.67

Technical data D 27.00 mm; R 2.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

FESTOOL ФРЕЗА ПАЗОВАЯ СПИРАЛЬНАЯ HW С ХВОСТОВИКОМ 8 ММ HW SPI S8 D4/10

-10%

Festool Spiral groove cutter HW Spi S8 D4/10

57.58 -10% 51.82

Technical data s 8 mm; D 4.00 mm; NL 10.00 mm; GL 45.00 mm Thanks to the solid carbide, the cutter can be used for a multitude of materials. Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates.

FESTOOL ФРЕЗА ПАЗОВАЯ СПИРАЛЬНАЯ HS С ХВОСТОВИКОМ 8 ММ HS

-10%

Festool Spiral groove cutter HS Spi S8 D12/20

27.99 -10% 25.19

Technical data s 8 mm; D 12.00 mm; NL 20.00 mm; GL 52.00 mm Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates. Thanks to the high-performance cutting steel, it is suitable above all for solid wood.

FESTOOL ФРЕЗЫ HW ДЛЯ ПРОФИЛИРОВАНИЯ ФАСОК HW 45°-OFK 500

-10%

Festool Chamfer cutter HW 45°-OFK 500

64.32 -10% 57.89

Technical data D 27.00 mm; Alpha 45.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

FESTOOL ФРЕЗЫ HW ДЛЯ ПРОФИЛИРОВАНИЯ ФАСОК HW 30°-OFK 500

-10%

Festool Chamfer cutter HW 30°-OFK 500

64.32 -10% 57.89

Technical data D 27.00 mm; Alpha 30.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

FESTOOL ФРЕЗЫ HW ДЛЯ ПРОФИЛИРОВАНИЯ ФАСОК HW 60°-OFK 500

-10%

Festool Chamfer cutter HW 60°-OFK 500

64.32 -10% 57.89

Technical data D 27.00 mm; Alpha 60.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

FESTOOL ФРЕЗА ЛАСТОЧКИН ХВОСТ" HW С ХВОСТОВИКОМ 8 ММ HW S8 D20/17/15°"

-10%

Festool Dovetail cutter HW S8 D20/17/15°

50.62 -10% 45.56

Technical data s 8 mm; D 20.00 mm; NL 17.00 mm; GL 49.00 mm; Alpha 15.00 ° Dovetail cutter for producing an open dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 20 template.

FESTOOL ФРЕЗА ЛАСТОЧКИН ХВОСТ" HS С ХВОСТОВИКОМ 8 ММ HS S8 D13

-10%

Festool Dovetail cutter HS S8 D13,8/13,5/15°

25.59 -10% 23.03

Technical data s 8 mm; D 13.80 mm; NL 13.50 mm; GL 46.00 mm; Alpha 15.00 ° Dovetail cutter for producing a semi-covered dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 14 template.

FESTOOL ФРЕЗА-СВЕРЛО HW С ХВОСТОВИКОМ 8 ММ HW S8 D8/19

-10%

Festool Drilling cutter HW S8 D8/19

32.45 -10% 29.21

Technical data s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.

FESTOOL СВЁРЛА ДЛЯ СКВОЗНЫХ ОТВЕРСТИЙ HW, ХВОСТ. 8 ММ HW S8 D5/30

-10%

Festool Through-hole drill HW S8 D5/30

34.74 -10% 31.27

Technical data s 8 mm; D 5.00 mm; NL 30.00 mm; GL 53.50 mm Festool cutters are produced from first-class steel and wear-resistant carbide. This allows high stability and run-out accuracy, precise contours and a long service life. The high-strength hard solderings of the carbide blades ensure risk-free and impeccable working.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW S8 HW R2 D20-KL OFK

-10%

Festool Roundover cutter S8 HW R2 D20-KL OFK

68.67 -10% 61.80

Technical data s 8 mm; D 20.00 mm; NL 2.20 mm; GL 47.00 mm; R 2.00 mm The ogee cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.

FESTOOL ФРЕЗА СКРУГЛЯЮЩАЯ HW S8 HW R3 D22-KL OFK

-10%

Festool Roundover cutter S8 HW R3 D22-KL OFK

69.92 -10% 62.93

Technical data s 8 mm; D 22.00 mm; NL 3.20 mm; GL 48.00 mm; R 3.00 mm The ogee cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.

FESTOOL ФРЕЗА ДЛЯ ПРОФИЛИРОВАНИЯ ФАСОК HW С ХВОСТОВИКОМ

-10%

Festool Chamfer cutter HW S8 D38,5/23/30°

75.06 -10% 67.55

Technical data s 8 mm; D 38.50 mm; NL 25.70 mm; GL 64.00 mm; Alpha 30.00 ° A chamfer softens an edge and protects against damage. It is also used frequently as a design element. An example of this is the Swiss profile on tables.

FESTOOL ФРЕЗА ДЛЯ ПРОФИЛИРОВАНИЯ ФАСОК HW С ХВОСТОВИКОМ 8 ММ

-10%

Festool Chamfer cutter HW S8 D36/45°

59.87 -10% 53.88

Technical data s 8 mm; D 36.00 mm; NL 11.50 mm; GL 53.00 mm; Alpha 45.00 ° A chamfer softens an edge and protects against damage. It is also used frequently as a design element. An example of this is the Swiss profile on tables.

FESTOOL ФРЕЗА ДЛЯ ПРОФИЛИРОВАНИЯ ФАСОК HW С ХВОСТОВИКОМ 8 ММ HW

-10%

Festool Chamfer cutter HW S8 D25,7/25,7/15°

64.20 -10% 57.78

Technical data s 8 mm; D 25.70 mm; NL 25.10 mm; GL 70.00 mm; Alpha 15.00 ° A chamfer softens an edge and protects against damage. It is also used frequently as a design element. An example of this is the Swiss profile on tables.

FESTOOL ФРЕЗА ПАЗОВАЯ HW, С ХВОСТОВИКОМ 8 ММ HW S8 D3/6

-10%

Festool Groove cutter HW S8 D3/6

36.56 -10% 32.90

Technical data s 8 mm; D 3.00 mm; NL 6.00 mm; GL 45.00 mm Whether for fittings, a rear wall or a sliding door, grooves can be used in a versatile manner. These are quickly created with a groove cutter of a suitable diameter.

FESTOOL ФРЕЗА ПАЗОВАЯ HW, С ХВОСТОВИКОМ 8 ММ HW S8 D18/30

-10%

Festool Groove cutter HW S8 D18/30

52.89 -10% 47.60

Technical data D 18.00 mm; NL 30.00 mm; GL 65.00 mm; s 8 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL ФРЕЗА ПАЗОВАЯ HW, С ХВОСТОВИКОМ 8 ММ HW S8 D13/20

-10%

Festool Groove cutter HW S8 D13/20

41.13 -10% 37.02

Technical data s 8 mm; D 13.00 mm; NL 20.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL ФРЕЗА ПАЗОВАЯ HW, С ХВОСТОВИКОМ 8 ММ HW S8 D12/30

-10%

Festool Groove cutter HW S8 D12/30

43.18 -10% 38.86

Technical data s 8 mm; D 12.00 mm; NL 30.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL ФРЕЗА ПАЗОВАЯ HW, С ХВОСТОВИКОМ 8 ММ HW S8 D10/30

-10%

Festool Groove cutter HW S8 D10/30

40.79 -10% 36.71

Technical data s 8 mm; D 10.00 mm; NL 30.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL ФРЕЗА ДЛЯ ОБРАБОТКИ КРОМОК СО СМЕННЫМИ НОЖАМИ HW С ХВОСТОВИКОМ

-10%

Festool Edge-trimming cutter with reversible blades HW S8 D19/20WM Z2

124.07 -10% 111.66

Technical data s 8 mm; D 19.00 mm; NL 20.00 mm; GL 64.00 mm; Alpha 0.00 ° Carbide groove cutter with replaceable reversible blades, cuts both on the head and on the side. Ideal for deep grooves. Reversible blade routing tools have fundamental advantages compared with traditional tools, especially for intensive use: No resharpening, tool always...

FESTOOL ФРЕЗА ПАЗОВАЯ HW С ХВОСТОВИКОМ 12 ММ HW S12 D12/40

-10%

Festool Groove cutter HW S12 D12/40

69.70 -10% 62.73

Technical data s 12 mm; D 12.00 mm; NL 40.00 mm; GL 90.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL ФРЕЗА ПАЗОВАЯ HW С ХВОСТОВИКОМ 12 ММ HW S12 D10/35

-10%

Festool Groove cutter HW S12 D10/35

66.83 -10% 60.15

Technical data s 12 mm; D 10.00 mm; NL 35.00 mm; GL 90.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Showing 1-30 of 262 item(s)

1
2
3
…
9
Next

P. Višinskio g. 102, LT-44151 Kaunas
Lithuania

+371 258 92254

info@ftool.ltt

WORKING HOURS

I Clients by appointment only
II-IV 09:00 - 16:00 without lunch break
V 09:00 – 15:00 without lunch break
VI-VII Closed

OUR

CUSTOMERS

FAVOURITE

INSTRUMENTS

UAB RYKAS © 2023 FESTOOL authorised partner