Active filters

  • Availability: In stock
  • Availability: Available
FESTOOL Pneumatinis ekscentrinis šlifuoklis LEX 3 150/5
  • -10%
Quick view

Festool Compressed air eccentric sander LEX 3 150/5

Regular price 734.66 -10% Price 661.19
Technical data Drive type Compressed air; Operating pressure (flow pressure) 6.00 bar; No. of strokes 20000 RPM; Eccentric motion speed 10000.00 RPM; Sanding stroke 5.00 mm; Vibration emission value Ah (single-axle) 2.70 m/s²; Vibration emissions value Ah (three-axle) 3.90 m/s²; Air consumption at rated load 290 l/min; Sound pressure level 72.00...
Лента противоскольжения FS-HU 10M
  • -10%
Quick view

Festool Adhesive cushion strip FS-HU 10M

Regular price 24.77 -10% Price 22.29
The adhesive cushion strip helps to prevent slipping of the guide rail even on smooth materials, while simultaneously protecting the surface of the workpiece from damage. In the event of wear or damage, it should be replaced, in order to guarantee perfect functioning of the guide rail.
FESTOOL Pneumatinis ekscentrinis šlifuoklis LEX 3 150/7
  • -10%
Quick view

Festool Compressed air eccentric sander LEX 3 150/7

Regular price 734.66 -10% Price 661.19
Technical data Drive type Compressed air; Operating pressure (flow pressure) 6.00 bar; No. of strokes 20000 RPM; Eccentric motion speed 10000.00 RPM; Sanding stroke 7.00 mm; Vibration emission value Ah (single-axle) 3.17 m/s²; Vibration emissions value Ah (three-axle) 5.80 m/s²; Air consumption at rated load 310 l/min; Sound pressure level 76.00...
FESTOOL БЫСТРОЗАЖИМНАЯ СТРУБЦИНА FS-RAPID/R
  • -10%
Quick view

Festool Quick-action clamp FS-RAPID/R

Regular price 58.48 -10% Price 52.63
Using the FS-Rapid quick-action clamp, the guide rail can be fixed to the workpiece via clamping on the side. This is done with a single hand movement. Not only is it very quick, but it also enables the rail to be clamped on workpieces for which clamps cannot be used.
FESTOOL Pneumatinis ekscentrinis šlifuoklis LEX 3 150/3
  • -10%
Quick view

Festool Compressed air eccentric sander LEX 3 150/3

Regular price 734.66 -10% Price 661.19
Technical data Drive type Compressed air; Operating pressure (flow pressure) 6.00 bar; No. of strokes 20000 RPM; Eccentric motion speed 10000.00 RPM; Sanding stroke 3.00 mm; Vibration emission value Ah (single-axle) 2.10 m/s²; Vibration emissions value Ah (three-axle) 3.70 m/s²; Air consumption at rated load 290 l/min; Sound pressure level 72.00...
FESTOOL СУМКА-ЧЕХОЛ FS-BAG
  • -10%
Quick view

Festool Bag FS-BAG

Regular price 87.97 -10% Price 79.17
With the FS-BAG guide rail bag, guide rails are neatly protected, transported and stored. The bag has a large main compartment, in which one or two guide rails up to a length of 1400 mm can be housed. In addition, there is another bag, in which connectors and fastening clamps or the FS-WA/90° angle stop can find space.
Festool Фреза пазовая HW, с хвостовиком 8 мм HW S8 D20/30
  • -10%
Quick view

Festool Groove cutter HW S8 D20/30

Regular price 58.48 -10% Price 52.63
Technical data s 8 mm; D 20.00 mm; NL 30.00 mm; GL 65.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.
FESTOOL НАПРАВЛЯЮЩИЙ УПОР FS-OF 1400
  • -10%
Quick view

Festool Guide rail adapter FS-OF 1400

Regular price 79.15 -10% Price 71.24
With the guide rail adapter, the router can be safely guided on the guide rail so that it's precisely straight. Combination with the guide rail is suitable primarily for milling of grooves, dovetail batons, decorative grooves or recesses in the surface.
Festool Фреза D 10-NL 28 HW-DF 500
  • -10%
Quick view

Festool DOMINO router D 10-NL 28 HW-DF 500

Regular price 49.78 -10% Price 44.80
Technical data D 10.00 mm; NL 28.00 mm The DOMINO routers are specially developed for the DOMINO joining machines and guarantee perfect precision, clean routing quality and optimised service life.
FESTOOL НАПРАВЛЯЮЩИЙ УПОР FS-OF 1000
  • -10%
Quick view

Festool guide rail adapter FS-OF 1000

Regular price 46.65 -10% Price 41.99
With the guide rail adapter, the router can be safely guided on the guide rail so that it's precisely straight. Combination with the guide rail is suitable primarily for milling of grooves, dovetail batons, decorative grooves or recesses in the surface.
FESTOOL ЗАЩИТА ОТ СКОЛОВ FS-SP 5000/T
  • -10%
Quick view

Festool Splinter guard FS-SP 5000/T

Regular price 34.92 -10% Price 31.43
Technical data Length 5000 mm The splinter guard prevents the edges from splintering, even with angled cuts. With its help, you can apply the guide rail exactly at the scribe mark. To be able to guarantee this permanently, it must be regularly replaced.
FESTOOL Полировальная губка PS STF D80x20 OR/5
  • -10%
Quick view

Festool Polishing sponge PS STF D80x20 OR/5

Regular price 35.53 -10% Price 31.98
Technical data Diameter 80.00 mm; Height 20.00 mm Work with passion to produce results. For high-gloss paints, UV clear coats, mineral materials or acrylic glass – with coarse to fine waffle face polishing pads and the perfect polishes. The clear colour-coding system leads you quickly to the appropriate product.
FESTOOL ЗАЩИТА ОТ СКОЛОВ FS-SP 1400/T
  • -10%
Quick view

Festool Splinter guard FS-SP 1400/T

Regular price 14.51 -10% Price 13.06
Technical data Length 1400 mm The splinter guard prevents the edges from splintering, even with angled cuts. With its help, you can apply the guide rail exactly at the scribe mark. To be able to guarantee this permanently, it must be regularly replaced.
FESTOOL Полировальная губка PS STF D80x20 WH/5
  • -10%
Quick view

Festool Polishing sponge PS STF D80x20 WH/5

Regular price 32.50 -10% Price 29.25
Technical data Diameter 80.00 mm; Height 20.00 mm Work with passion to produce results. For high-gloss paints, UV clear coats, mineral materials or acrylic glass – with coarse to fine waffle face polishing pads and the perfect polishes. The clear colour-coding system leads you quickly to the appropriate product.
FESTOOL КЛЕЙ, ЦВЕТ НАТУРАЛЬНЫЙ EVA NAT 48X-KA 65
  • -10%
Quick view

Festool EVA adhesive, natural EVA nat 48x-KA 65

Regular price 142.94 -10% Price 128.65
Technical data Adhesive diameter 63 mm; Adhesive height 26 mm; Processing temperature 190 °C; Moisture resistance in accordance with D1 EVA hot-melt adhesive of proven industrial quality, dimensions and properties perfectly tailored to the CONTURO glue application system.
FESTOOL КЛЕЙ, ЦВЕТ БЕЛЫЙ EVA WHT 48X-KA 65
  • -10%
Quick view

Festool EVA adhesive, white EVA wht 48x-KA 65

Regular price 142.94 -10% Price 128.65
Technical data Adhesive diameter 63 mm; Adhesive height 26 mm; Processing temperature 190 °C; Moisture resistance in accordance with D1 EVA hot-melt adhesive of proven industrial quality, dimensions and properties perfectly tailored to the CONTURO glue application system.
FESTOOL ФЕТР PF-STF 80X133 STF H/5
  • -10%
Quick view

Festool Polishing felt PF-STF 80x133 STF H/5

Regular price 20.54 -10% Price 18.49
Technical data Dimensions length x width 80 x 133.00 mm A brilliant edge radius is also an element of perfect high-gloss edging. Using the polishing felt, an HSK 80 x 133 hand sanding block and the corresponding polish, the radius can quickly be made highly glossy.
Festool Сверло-зенкер BTA BSTA HS D 5 CE
  • -10%
Quick view

Festool Drill countersink BSTA HS D 5 CE

Regular price 80.12 -10% Price 72.11
Technical data Diameter 5.00 mm The drill countersink with adjustable depth stop is perfectly suited to diverse visible screw fittings in wood, acrylic, aluminium or mineral material. It enables drilling and countersinking in a single work step. Versatile thanks to an adjustable drilling and countersinking depth and extremely durable as a...
FESTOOL КАТТЕР ZK HW 45/45
  • -10%
Quick view

Festool Scraper ZK HW 45/45

Regular price 71.65 -10% Price 64.49
Technical data Dimensions 45 x 45.00 mm; Dimensions (L x W x H) 45 x 45.00 x 1.20 mm; Curves 1.00/1.50/2.00 mm As with large, stationary machines, the scraper is a very important work step for processing plastic edges. With its help, the edging overhang becomes perfectly flush and the radius is cleanly removed in order to get rid of impact...
FESTOOL РЕЗАК KP 65/2
  • -10%
Quick view

Festool Trimming machine KP 65/2

Regular price 207.00 -10% Price 186.30
Technical data Trimming height 65.00 mm; Trimming thickness 2.00 mm With the KP 65/2 trimming machine, not only perfectly flush cross cuts of the edging overhang for straight edges but also clean impacts when edging round plates are successful.
FESTOOL Защита от сколов SP-TS 55 R/5
  • -10%
Quick view

Festool Splinter guard SP-TS 55 R/5

Regular price 18.00 -10% Price 16.20
The splinter guard is fitted in place of the viewing window and facilitates splinter-free cuts to the right of the saw blade. When the machine is running, cuts are made in the inserted splinter guard so that it adapts to fit the saw blade exactly. The splinter guard can be moved up or down, making it suitable for cuts with or without a guide rail.
FESTOOL МАГАЗИН ПОДАЧИ КРОМОЧНОГО МАТЕРИАЛА KSP-KA 65
  • -10%
Quick view

Festool Magazine for holding edging KSP-KA 65

Regular price 68.76 -10% Price 61.88
Technical data Max. edge height 45.00 mm; Max. edge thickness 2.00 mm When processing long edges, the edge bander helps the edge to be fed into the machine cleanly and without being caught. For this, the edge cut to length in advance is rolled up and inserted.
FESTOOL Защита от сколов SP-TS 55/5
  • -10%
Quick view

Festool Splinter guard SP-TS 55/5

Regular price 18.00 -10% Price 16.20
The splinter guard is fitted in place of the viewing window and facilitates splinter-free cuts to the right of the saw blade. When the machine is running, cuts are made in the inserted splinter guard so that it adapts to fit the saw blade exactly. The splinter guard can be moved up or down, making it suitable for cuts with or without a guide rail.
FESTOOL АДАПТЕР-ОСНОВАНИЕ AP-KA 65
  • -10%
Quick view

Festool Adapter plate AP-KA 65

Regular price 443.22 -10% Price 398.90
Technical data Dimensions length x width 254 x 420.00 mm; Min. installation height 150.00 mm; Cutting angle adjustment 0 - 47 ° The CONTURO is also suitable for working when stationary. It is simply inserted via this adapter plate in the MFT/3 multifunction table or a bench you have built yourself. Not only can you affix edging to straight...
FESTOOL ЗАРЯДНОЕ УСТРОЙСТВО MXC
  • -10%
Quick view

Festool Charger MXC

Regular price 68.61 -10% Price 61.75
Technical data Charging current 2,8 A; Input voltage 220.00 - 240.00 V The MXC charger charges the battery packs of the CXS and TXS cordless drills. The LED display provides a complete overview, indicating the current charging progress and the remaining charge time at any time. And, of course, the MXC charger is also fully covered by Festool...
Back to top