SEMI-STATIONARY WORK

Active filters

FESTOOL СОЕДИНИТЕЛЬ VS
  • -10%
Quick view

Festool Connecting piece VS

Regular price 17.88 -10% Price 16.09
With the VS connecting piece, several MFT 3s can be connected to form a large, stable work surface. It is also used to connect the FST 660/85 or the MFT 800 to the Basis Plus system.
FESTOOL РЫЧАЖНАЯ СТРУБЦИНА FS-HZ 160
  • -10%
Quick view

Festool Lever clamp FS-HZ 160

Regular price 67.43 -10% Price 60.69
Technical data Clamping width 160.00 mm The Festool clamps fit perfectly into the system and can be used in various ways. Whether for clamping guide rails, for clamping workpieces on the multifunction table (MFT) or the mobile workshop, for secure fastening of sections on the semi-stationary saws like the CS S50/70 or the KS/KSC 60 and for much...
FESTOOL ЗАЖИМЫ MFT-SP
  • -10%
Quick view

Festool Fixed clamps MFT-SP

Regular price 123.01 -10% Price 110.71
The MFT-SP clamping elements offer round and angular workpieces a secure hold without slipping. The fact that they are compatible with the MFT hole pattern means that it is easy to attach them to a multifunction table or the mobile workshop.
FESTOOL ВИНТОВАЯ СТРУБЦИНА FSZ 120
  • -10%
Quick view

Festool Fastening clamp FSZ 120

Regular price 49.07 -10% Price 44.16
Technical data Clamping width 120.00 mm The Festool clamps fit perfectly into the system and can be used in various ways. Whether for clamping guide rails, for clamping workpieces on the multifunction table (MFT) or the mobile workshop, for secure fastening of sections on the semi-stationary saws like the CS S50/70 or the KS/KSC 60 and for much...
FESTOOL ПОДВИЖНЫЙ СТОЛ ST
  • -10%
Quick view

Festool Sliding table ST

Regular price 397.29 -10% Price 357.56
Technical data Max. working width for trimming cuts 830.00 mm The sliding table offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 50. But other desired angles can also be set. Simply push the materials through on the saw blade – and you're done! At the same time,...
Festool угловой упор AB-KS 120
  • -10%
Quick view

Festool Crown stop AB-KS 120

Regular price 87.97 -10% Price 79.17
The additional stop for secure placement and easy clamping of crown mouldings. Crown mouldings slipping is a thing of the past. With the crown stop, the strips are held in position and allow a perfect cut.
FESTOOL Винтовая струбцина FSZ 300 для FS/2, MFT
  • -10%
Quick view

Festool Fastening clamp FSZ 300

Regular price 60.41 -10% Price 54.37
Technical data Clamping width 300.00 mm The Festool clamps fit perfectly into the system and can be used in various ways. Whether for clamping guide rails, for clamping workpieces on the multifunction table (MFT) or the mobile workshop, for secure fastening of sections on the semi-stationary saws like the CS S50/70 or the KS/KSC 60 and for much...
Festool Удлинитель стола CS 70 VL
  • -10%
Quick view

Festool Extension table CS 70 VL

Regular price 340.76 -10% Price 306.68
Technical data Dimensions length x width 525 x 522.00 mm The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length extension table can be very easily installed using two adapter pieces and...
Festool Подвижный стол CS 70 ST 650
  • -10%
Quick view

Festool Sliding table CS 70 ST 650

Regular price 590.15 -10% Price 531.14
Technical data Max. working width for trimming cuts 650.00 mm The slide offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 70. But other desired angles can also be set. Simply push the materials through on the saw blade – and you're done! At the same time, the...
Festool Рабочий центр WCR 1000 T-Loc WCR 1000 T-Loc
  • -10%
Quick view

Festool Workcenter WCR 1000 T-LOC

Regular price 528.89 -10% Price 476.00
Technical data Length 1050.00 mm; Width 362.00 mm; Height adjustable 545 - 785 mm; Size of square hole pattern 9.20 x 9.20 mm; Inner hole distance of square hole pattern 38.00 mm; Product weight 10.20 kg Attached to Festool mobile dust extractors without tools via a Systainer interface (Classic or T-LOC), the WCR 1000 Workcenter turns any...
Festool Аккумуляторная станция SYS-PowerStation SYS-PST 1500 Li HP SYS-PST 1500 Li HP
  • -10%
Quick view

Festool SYS-PowerStation SYS-PST 1500 Li HP

Regular price 3,450.04 -10% Price 3,105.04
Technical data Cable length 2.00 m; Drive type Mains; Output voltage 230 V ~ / 50 Hz pure sine; Continuous power 3680 watt; Peak power 18000 watt; Peak power (>25 sec.) 9000 watt; Peak power (>500 sec.) 5400 watt; Nominal energy content 1555.00 Wh; Battery technology Li-Ion; Charging duration (depending on cell temperature) 3,0 h; IP protection...
Back to top