Active filters

  • Availability: In stock
FESTOOL Спиральная мешалка HS 2 140x600 M14
  • -10%
Quick view

Festool Spiral stirrer HS 2 140x600 M14

Regular price 37.94 -10% Price 34.15
Technical data Material quantity 20 – 40 kg; Diameter 140.00 mm; Length 600.00 mm Large stirring rod spiralled to the right with two spirals for stiff materials with an M14 internal thread. Take the heavy mass from the bottom to the top. The material is conveyed from the bottom of the tub up through the centre of the stirrer, and flows back...
FESTOOL МЕШОК-ПЫЛЕСБОРНИК SB-LONGLIFE RTS/DTS/ETS
  • -10%
Quick view

Festool Long-life chip collection bag SB-Longlife RTS/DTS/ETS

Regular price 38.43 -10% Price 34.59
The long-life dust collection bag is suitable for RTS 400, RTSC 400, DTS 400, DTSC 400, ETS 125, ETSC 125. If you want to work free of dust without a mobile dust extractor, the long-life dust collection bag is exactly right. The dust collection bag is made of durable polyester sanding cloth and is therefore resistant to wear.
FESTOOL КАССЕТА ДЛЯ БИТ BIT/BH-SORT/31X
  • -10%
Quick view

Festool Bit cassette BIT/BH-SORT/31x

Regular price 42.54 -10% Price 38.29
Technical data Length 25 mm The bit range in a practical SYS case. The bit case contains 30 high-quality bits and a magnetic CENTROTEC bit holder for general screwdriving work, cleanly stowed and quickly at hand.
FESTOOL Šlifavimo popierius STF D150/48 P220 RU2/50
  • -10%
Quick view

Festool Abrasive sheet STF D150/48 P220 RU2/50 Rubin 2

Regular price 49.90 -10% Price 44.91
Technical data Grit P220; Diameter 150.00 mm The Rubin 2 is an abrasive specially for wooden materials, whether for intermediate sanding or final sanding for varnishing or for preparatory sanding work for oiling or waxing. The right abrasive for any use thanks to many different grits (P 40–220).
Festool Спиральная мешалка HS 3 140x600 R M14
  • -10%
Quick view

Festool Spiral stirrer HS 3 140x600 R M14

Regular price 50.76 -10% Price 45.68
Technical data Material quantity 25 – 40 kg; Diameter 140.00 mm; Length 600.00 mm Stirring rod spiralled to the right with three spirals for stiff materials with an M14 internal thread. Take the heavy mass from the bottom to the top. The material is conveyed from the bottom of the tub up through the centre of the stirrer, and flows back down...
FESTOOL Спиральная мешалка HS 2 160x600 M14
  • -10%
Quick view

Festool Spiral stirrer HS 2 160x600 M14

Regular price 52.81 -10% Price 47.53
Technical data Material quantity 30 – 60 kg; Diameter 160.00 mm; Length 600.00 mm Large stirring rod spiralled to the right with two spirals for stiff materials with an M14 internal thread. Take the heavy mass from the bottom to the top. The material is conveyed from the bottom of the tub up through the centre of the stirrer, and flows back...
FESTOOL Фреза "ласточкин хвост" HW с хвостовиком 8 мм HW S8 D20/26/10°
  • -10%
Quick view

Festool Dovetail cutter HW S8 D20/26/10°

Regular price 57.28 -10% Price 51.55
Technical data s 8 mm; D 20.00 mm; NL 26.00 mm; GL 58.00 mm; Alpha 10.00 ° Dovetail cutter for producing an open dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZO 20 template.
FESTOOL Šlifavimo popierius STF-D150/48 P80 SA/25
  • -10%
Quick view

Festool Abrasive sheet STF-D150/48 P80 SA/25 Saphir

Regular price 62.96 -10% Price 56.66
Technical data Grit P80; Diameter 150.00 mm The Saphir abrasive wheels are best suited to sanding off thick coatings on hard substrates. Having been designed for extreme conditions, even stubborn coatings can be removed without effort. Thanks to the StickFix back, the abrasive can be applied to the sanding pad easily and without tools.
FESTOOL Šlifavimo popierius STF-D150/48 P24 SA/25
  • -10%
Quick view

Festool Abrasive sheet STF-D150/48 P24 SA/25 Saphir

Regular price 73.95 -10% Price 66.56
Technical data Grit P24; Diameter 150.00 mm The Saphir abrasive wheels are best suited to sanding off thick coatings on hard substrates. Having been designed for extreme conditions, even stubborn coatings can be removed without effort. Thanks to the StickFix back, the abrasive can be applied to the sanding pad easily and without tools.
Festool Дисковые фрезы HW-SZ 12
  • -10%
Quick view

Festool Cutter wheel HW-SZ 12

Regular price 147.06 -10% Price 132.35
The retrofitting set with twelve carbide-tipped milling heads for the SZ-RG 80 milling head. The substrate is roughed up due to the pointed shape, and the material to be detached is quickly and easily removed.
FESTOOL Сверлильный патрон с зубчатым венцом CC-16 FFP
  • -10%
Quick view

Festool Key-type chuck CC-16 FFP

Regular price 155.51 -10% Price 139.96
Technical data Holder FastFix; Clamping range 3.00 - 16.00 mm The robust key-type chuck can be quickly connected to the FastFix interface of the drill without tools. The clamping range of up to 16 mm enables the use of diverse drilling and screwdriving tools.
FESTOOL Алмазная чашка DIA HARD-D80
Quick view

Festool Diamond disc DIA HARD-D80

Price 222.57
Technical data Segment height 6 mm; Active surface 1385 mm²; Diameter 80.00 mm The DIA HARD replacement disc with a diameter of 80 mm and a diamond segment height of 11 mm achieves the best results for hard substrates. The replacement disc is easy to attach to the tool head of the RG 80. Thanks to the use of high-quality materials and the...
FESTOOL АЛМАЗНАЯ ЧАШКА DIA ABRASIVE-D130 PREMIUM
Quick view

Festool Diamond disc DIA ABRASIVE-D130 PREMIUM

Price 264.26
Technical data Segment height 7 mm; Active surface 3460 mm²; Diameter 130.00 mm; Interior dia. 25.00/22.20 mm The DIA ABRASIVE Premium D130 milling disc for the RG 130 with a diamond segment height of 7 mm is well suited to abrasive materials containing a lot of sand on smaller surfaces. Thanks to the use of high-quality materials and the...
FESTOOL Алмазная чашка DIA STONE-D130 PREMIUM
Quick view

Festool Diamond disc DIA STONE-D130 PREMIUM

Price 264.26
Technical data Segment height 7 mm; Active surface 2560 mm²; Diameter 130.00 mm; Interior dia. 25.00/22.20 mm The DIA Stone Premium D130 milling disc for the RG 130 with a diamond segment height of 7 mm is well suited to very hard materials on a hard substrate. Thanks to the use of high-quality materials and the segment height, the disc has a...
FESTOOL Режущая цепь MC-CM 28x35/40x100 A
  • -10%
Quick view

Festool Cutting chain MC-CM 28x35/40x100 A

Regular price 449.87 -10% Price 404.88
Technical data Slot length 35.00 mm; Slot depth 100.00 mm The mortising chain is for use in mortising set chain mortisers. Pitch type A allows fast routing results to be achieved.
FESTOOL Алмазная чашка DIA ABRASIVE-D150
Quick view

Festool Diamond disc DIA ABRASIVE-D150

Price 476.82
Technical data Segment height 11 mm; Active surface 3660 mm²; Diameter 150.00 mm The DIA ABRASIVE replacement disc with a diameter of 150 mm and a diamond segment height of 11 mm achieves the best results for abrasive materials containing a lot of sand. The replacement disc is easy to attach to the tool head of the RG 150. Thanks to the use of...
FESTOOL ТОРЦОВОЧНАЯ ШИНА FSK 420
  • -10%
Quick view

Festool Cross-cutting guide rail FSK 420

Regular price 212.43 -10% Price 191.19
Technical data Cutting length 420.00 mm; Angular range -60 – +60 °; Product weight 1.26 kg One click and you're done. The HK 55, HKC 55 and HK 85 Festool circular saws can easily be connected to the FSK cross-cutting guide rails, which are available in three different lengths of 250 mm, 420 mm or 670 mm. In just a few steps, this produces a...
FESTOOL Алмазная чашка DIA HARD-D150
Quick view

Festool Diamond disc DIA HARD-D150

Price 476.82
Technical data Segment height 11 mm; Active surface 3660 mm²; Diameter 150.00 mm The DIA HARD replacement disc with a diameter of 150 mm and a diamond segment height of 11 mm achieves the best results for hard substrates. The replacement disc is easy to attach to the tool head of the RG 150. Thanks to the use of high-quality materials and the...
FESTOOL Фреза "ласточкин хвост" HW с хвостовиком 8 мм HW S8 D13,8/13,5/15°
  • -10%
Quick view

Festool Dovetail cutter HW S8 D13,8/13,5/15°

Regular price 47.24 -10% Price 42.52
Technical data s 8 mm; D 13.80 mm; NL 13.50 mm; GL 46.00 mm; Alpha 15.00 ° Dovetail cutter for producing a semi-covered dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 14 template.
Festool Спиральная мешалка HS 3 120x600 L M14
  • -10%
Quick view

Festool Spiral stirrer HS 3 120x600 L M14

Regular price 45.43 -10% Price 40.89
Technical data Material quantity 10 – 25 kg; Diameter 120.00 mm; Length 600.00 mm Stirring rod spiralled to the left with three spirals for very fluid materials. With mixing, as the material is pushed from top to bottom and flows back up at the sides. Possible lumps are broken up without spraying due to the high strength of the drive and the...
Festool Спиральная мешалка HS 3 120x600 R M14
  • -10%
Quick view

Festool Spiral stirrer HS 3 120x600 R M14

Regular price 45.43 -10% Price 40.89
Technical data Material quantity 10 – 25 kg; Diameter 120.00 mm; Length 600.00 mm Stirring rod spiralled to the right with three spirals for stiff materials with an M14 internal thread. Take the heavy mass from the bottom to the top. The material is conveyed from the bottom of the tub up through the centre of the stirrer, and flows back down...
FESTOOL Кассета для бит TX 10-50/BH-SORT/31x
  • -10%
Quick view

Festool Bit cassette TX 10-50/BH-SORT/31x

Regular price 42.54 -10% Price 38.29
Technical data Length 25 mm The bit range in a practical SYS case. The bit case contains 30 high-quality bits and a magnetic CENTROTEC bit holder for general screwdriving work, cleanly stowed and quickly at hand.
FESTOOL Быстрозакручиваемые шурупы DWS C FT 3,9x25 1000x
  • -10%
Quick view

Festool Drywall screws DWS C FT 3,9x25 1000x

Regular price 41.44 -10% Price 37.30
Technical data Diameter 3.90 mm; Length 25.00 mm The drywall screws loaded in a magazine are suitable for time-saving screwing of plasterboard panels with magazine drywall screwdrivers, for example. The phosphated screws are protected against corrosion and can be skimmed.
FESTOOL Ограничитель глубины DC UNI FF
  • -10%
Quick view

Festool Depth stop DC UNI FF

Regular price 145.85 -10% Price 131.27
Technical data Max. screw size for softwood 6 x 100 mm; Holder FastFix The depth stop can be used with all drills and impact drills with a FastFix interface. Large-scale screwdriving applications with a uniform screwdriving depth are accomplished very easily and without complications with the adjustable depth stop with integrated claw coupling....
FESTOOL Щеточное кольцо BC-DCG AG 125
  • -10%
Quick view

Festool Brush ring BC-DCG AG 125

Regular price 25.14 -10% Price 22.63
The brush set for retrofitting. The brushes are flush with the substrate and thus ensure improved extraction when working with the DCG-AGP 125.
Festool Угловая насадка AU-43 FFP
  • -10%
Quick view

Festool Angle attachment AU-43 FFP

Regular price 208.79 -10% Price 187.91
Technical data Max. screw size for softwood 10 x 300 mm; Holder FastFix; Collar dia. 43.00 mm The angle attachment enables demanding drilling and screwdriving applications in narrow spaces. The robust design allows the processing of all screwdriving and drilling diameters suitable for the drill, and also creates maximum torques. The angle...
Back to top