Active filters

  • Availability: In stock
FESTOOL Параллельный упор PA-HL
  • -10%
Quick view

Festool Parallel side fence PA-HL

Regular price 25.97 -10% Price 23.37
The parallel stop is attached to the bottom of the planer and makes it possible to create rebates with a preset width. When working near edges, it ensures that the planer is guided cleanly and does not drift to the side.
FESTOOL Пригоночная фреза HW S8 D12,7/NL25
  • -10%
Quick view

Festool Edge trimming cutter HW S8 D12,7/NL25

Regular price 63.33 -10% Price 57.00
Technical data s 8 mm; D 12.70 mm; NL 25.00 mm; GL 65.00 mm; Alpha 0.00 ° A cylindrical cutter for routing with templates. Thanks to the small diameter, also ideally suited to smaller inner radii.
FESTOOL Сверло под фурнитуру HW S8 D20
  • -10%
Quick view

Festool Hinge location cutter HW S8 D20

Regular price 66.58 -10% Price 59.92
Technical data s 8 mm; D 20.00 mm; GL 54.50 mm Hinge location cutter specially for routers, with centring point and two chamfered reamer blades. Thanks to the special blade design, the drill bits can be used on high-speed routers.
FESTOOL Пригоночная фреза HW S8 D19/NL25
  • -10%
Quick view

Festool Edge trimming cutter HW S8 D19/NL25

Regular price 66.58 -10% Price 59.92
Technical data s 8 mm; D 19.05 mm; NL 25.00 mm; GL 62.00 mm; Alpha 0.00 ° A cylindrical cutter for routing with templates. The ball bearing on top allows the template to be positioned on the workpiece and protects it from damage when processing.
FESTOOL Скругляющая фреза HW S8 D38,1/R12,7 KL
  • -10%
Quick view

Festool Roundover cutter HW S8 D38,1/R12,7 KL

Regular price 82.64 -10% Price 74.38
Technical data s 8 mm; R 12.70 mm; D 38.10 mm; NL 19.00 mm; GL 59.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.
FESTOOL Фрезы для сращивания HW S8 D34/NL32
  • -10%
Quick view

Festool Tongue and groove cutter HW S8 D34/NL32

Regular price 106.70 -10% Price 96.03
Technical data s 8 mm; D 34.00 mm; NL 32.00 mm; GL 62.00 mm Solid wood can be glued to surfaces with the tongue and groove cutter. Once set exactly, the wooden parts can be joined together flush.
FESTOOL Фреза пазовая HW S12 D30/35
  • -10%
Quick view

Festool Groove cutter HW S12 D30/35

Regular price 145.09 -10% Price 130.58
Technical data s 12 mm; D 30.00 mm; NL 35.00 mm; GL 90.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.
FESTOOL Фреза для выборки желобка HW S8 R12,7
  • -10%
Quick view

Festool Flute cutter HW S8 R12,7

Regular price 57.52 -10% Price 51.77
Technical data s 8 mm; D 25.40 mm; NL 14.00 mm; GL 44.00 mm; R 12.70 mm Flutes are versatile in use: For profiling a workpiece or – with the appropriate radius router – for a design hinge.
FESTOOL Фрезы пазовые спиральные HS Spi S8 D20/25
  • -10%
Quick view

Festool Spiral groove cutter HS Spi S8 D20/25

Regular price 44.95 -10% Price 40.46
Technical data s 8 mm; D 20.00 mm; NL 25.00 mm; GL 57.00 mm Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates. Thanks to the high-performance cutting steel, it is suitable above all for solid wood.
FESTOOL Фреза пазовая HW S8 D6/14
  • -10%
Quick view

Festool Groove cutter HW S8 D6/14

Regular price 40.23 -10% Price 36.21
Technical data s 8 mm; D 6.00 mm; NL 14.00 mm; GL 55.00 mm Whether for fittings, a rear wall or a sliding door, grooves can be used in a versatile manner. These are quickly created with a groove cutter of a suitable diameter.
FESTOOL Фреза пазовая HW S8 D10/20
  • -10%
Quick view

Festool Groove cutter HW S8 D10/20

Regular price 36.85 -10% Price 33.17
Technical data s 8 mm; D 10.00 mm; NL 20.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.
FESTOOL Фрезы пазовые спиральные HS Spi S8 D10/30
  • -10%
Quick view

Festool Spiral groove cutter HS Spi S8 D10/30

Regular price 36.13 -10% Price 32.52
Technical data s 8 mm; D 10.00 mm; NL 30.00 mm; GL 60.00 mm Hand-crafted corner connectors in solid wood: Visually attractive corner connectors can be routed with the VS 600 jointing system, the appropriate template and the appropriate cutter.
Freza HS S8 D11/9,5/60?
  • -10%
Quick view

Festool V-groove cutter HS S8 D11/9,5/60°

Regular price 18.36 -10% Price 16.52
Technical data s 8 mm; D 11.00 mm; NL 9.50 mm; GL 50.00 mm; Alpha 60.00 ° No matter whether for complex embellishing of a workpiece or for easy routing of recesses such as grooves or notches, groove cutters with a profile are best suited to this.
FESTOOL Фреза дисковая пазовая HW D40x3
  • -10%
Quick view

Festool Disk groove cutter HW D40x3

Regular price 27.67 -10% Price 24.90
Technical data D 40.00 mm; Dia. 6.00 mm; NL 3.00 mm The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.
Freza HS S8 D 3/8
  • -10%
Quick view

Festool Groove cutter HS S8 D 3/8

Regular price 19.09 -10% Price 17.18
Technical data s 8 mm; D 3.00 mm; NL 8.00 mm; GL 45.00 mm If you wish to achieve perfect cutting results with ease in softwood when drilling, grooving, rebating and long-hole routing, you are best advised to use the HS groove cutter. The cutter cuts precisely, and makes drilling easier thanks to its ground base blade.
FESTOOL Фрезы пазовые спиральные HS Spi S8 D16/20
  • -10%
Quick view

Festool Spiral groove cutter HS Spi S8 D16/20

Regular price 36.13 -10% Price 32.52
Technical data s 8 mm; D 16.00 mm; NL 20.00 mm; GL 52.00 mm Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates. Thanks to the high-performance cutting steel, it is suitable above all for solid wood.
FESTOOL Фреза для обработки алюминиевых сплавов HS S8 D5/NL23
  • -10%
Quick view

Festool Aluminium cutter HS S8 D5/NL23

Regular price 19.82 -10% Price 17.84
Technical data s 8 mm; D 5.00 mm; NL 23.00 mm; GL 65.00 mm This cutter is perfectly suited to routing grooves for draining water in window profiles made of aluminium.
FESTOOL Бит Phillips PH 3-100 CE/2
  • -10%
Quick view

Festool Bits PH 3-100 CE/2

Regular price 21.39 -10% Price 19.25
Technical data Size PH 3; Length 100 mm The extra-long bit can be directly inserted into the CENTROTEC tool chuck and locked. The construction length of 100 mm makes screwing easier, for example screwing of fittings and screw fittings in bore holes or in narrow spaces.
FESTOOL Бит PZ PZ 3-100 CE/2
  • -10%
Quick view

Festool Bits PZ 3-100 CE/2

Regular price 21.39 -10% Price 19.25
Technical data Size PZ 3; Length 100 mm The extra-long bit can be directly inserted into the CENTROTEC tool chuck and locked. The construction length of 100 mm makes screwing easier, for example screwing of fittings and screw fittings in bore holes or in narrow spaces.
FESTOOL Шлифподошва в форме утюга SSH-STF-V93x266/14
  • -10%
Quick view

Festool Iron sanding pad SSH-STF-V93x266/14

Regular price 57.16 -10% Price 51.44
Technical data Dimensions 93 x 266.00 mm The SSH-STF-V93 x 266/14 sanding pad is suitable for the RS 300, RS 3 and LRS 93. It is used if, for example, alcoves and corners on stairs or furniture components must be sanded. It is ideally suited to getting into all angles.
FESTOOL Шлифовальная подошва SSH-STF-80x130/12
  • -10%
Quick view

Festool Sanding pad SSH-STF-80x130/12

Regular price 33.59 -10% Price 30.23
Technical data Dimensions 80 x 130.00 mm The SSH-STF-80 x 130/12 sanding pad is suitable for the RTS 400, RS 400 and RTSC 400. Thanks to the StickFix burr layer, quickly changing abrasive is possible without any difficulty.
Back to top